Menu

Car Parts

Replace Your Toyota Highlander Tail Lights on Your Own

,

Recognized as one of the most affordable SUVs with unquestionable quality, Toyota Highlander comes with a sassy and chic look and gives superior van-like comfort to its riders.  However, this powerful car has some fragile parts too. Of them, the most fragile are the Toyota Highlander tail lights. Positioning at the rear end of the car and weak built are the major reasons for Toyota Highlander tail lights fragility.

Material that Toyota uses for the Toyota Highlander tail lights is what they call “polycarbonate” or “acrylic” but that material is nothing but, breakable plastic. Positioning of car tail lights is the most comprehensible reason for its recurring damages but when poor quality is added to that, tail lights become even more fragile. Therefore, when you buy a Toyota Highlander, be prepared for replacing Toyota Highlander tail lights occasionally if not frequently.

For frequent replacement of the tail lights, paying high price to the mechanics is not feasible every time. Learning to replace the tail lights on your own is perhaps the best way to save your money and your time.

Step 1

Take the key out of the ignition and ensure your safety by engaging the emergency brake. Keep the headlamp control also in off position.

Step 2

Go to the back end of you Highlander and open the tailgate.

Step 3

Locate the Toyota Highlander tail light assembly cover in the back of the trunk. It is triangular in shape. Try to open the assembly by prying it either with fingers or with a flathead screwdriver.

Step 4

Locate the broken bulb. Now twist and turn the broken bulb counter-clockwise and pull it from the socket and then dispose it immediately.

Step 5

Now replace the old bulb with the new bulb.

Step 6

Push the new bulb socket into the assembly and then turn it clockwise to secure its position.

Step 7

Now before you close the assembly cover, make sure the bulb is working properly. In case it is working fine, close the assembly cover and replace and shut the trunk trim.

Remember, you need to handle the tail light bulbs with utmost care as they can easily pop, shatter or crack if dropped. Before replacing the bulb, make sure which one you need to replace. Read Section 7-3 of your Highlander owner’s manual for more information. In case, you are apprehensive about replacing the Toyota Highlander tail lights on your own, take assistance of a qualified mechanic.

Follow Some Simple Steps – Replace the Saturn Ion Mirrors on Your Own

,

Saturn Ion mirrors are indispensable body part of the Ion. Starting from outside view to inside view, and even side view, the Saturn Ion mirrors give drivers a clearer view of everything that comes in the path of the car. Just like any other vehicle mirrors, the Saturn Ion mirrors not only help drivers park their cars in a more accurate and safer way but also help to drive in a safer way by providing clearer view of the road. The outside mirrors reflect the side and behind view of the car whereas the rearview mirror reflects the objects out of the rear window. Car mirrors such as the Saturn Ion mirrors, depending upon the curves, reflect anything within its scope. The Saturn Ion mirrors help the driver know about the exact condition and setting of the traffic so that driver can make a right decision on the road.

In case, your Saturn Ion has a broken side view mirror, keeping in mind the immense functional importance of the Saturn Ion side view mirrors, immediate replacement of broken mirror is important. For replacement you do not have to go to a garage or dealership. In fact, replacing the Saturn Ion mirrors is so easy that you can replace the side view mirrors on your own.

Step 1

Buy replacement Saturn Ion mirrors from reputed online retailers.

Step 2

Roll down the window and take keys out of ignition.

Step 3

To avoid the risk of electrocution, disconnect the battery’s negative cable.

Step 4

Locate the plastic panel that is inside the door and directly behind the Saturn Ion side view mirror. Use a screw driver to pry the panel away from the door. Removing the panel is not difficult as the panel is attached with main internal plastic door panel and once the three clips that hold the plastic panel with the door are removed, the panel will be replaced easily.

Step 5

Now you will find a foam piece inside the hole of the removed panel. Carefully remove that foam piece and disconnect the cord of the power mirror from the door panel connection.

Step 6

Locate 3 bolts and use a socket or a ratchet to take out the side view mirror bolts so that the entire mirror assembly from the car can be removed easily. Pry the plastic tabs and use a torx driver to separate the mirror from the mirror assembly. Support the old mirror during removal. Once the bolts are removed, pull the old mirror away from the door.

Step 7

To install a new mirror first place the new Saturn Ion mirror, attached to the backing, into the mirror assembly and tighten the screws to attach the mirror to the door panel. Then re-connect the power mirror cord to the cord on the door panel.

Step 8

Place the foam piece back in its position and replace the screws to install the Saturn Ion mirror cover. Place all the clips and attach the door panel then tighten all screws. Put all the screw caps in the reverse order.

Step 9

Now, connect the battery, and check that the Saturn Ion power mirror works properly or not.

Following the above steps, replacing the Saturn Ion mirrors will not be difficult anymore. However, before replacing the mirrors make sure you have gone through the user manual thoroughly. In case, you feel unsure about changing the Saturn Ion mirrors on your own, contact a professional mechanic for replacing the mirrors.

Learn How to Replace Pontiac G6 Mirrors

,

Introduced in 2005, Pontiac G6 is available as a coupe, sedan, and a convertible with a retractable hardtop. With a highly stylized interior as well as exterior, V6 engine, which is strong, powerful, and fuel-efficient, up-to-date technology, excellent build quality, and attractive price, Pontiac G6 catches the right pulse of the car-buyers.

However, Pontiac G6 comes with many vulnerable parts and one of them is Pontiac G6 mirrors. Like any other car mirrors, Pontiac G6 mirrors are prone to breakage, even the slightest nudge from another vehicle can result in breaking of the glass. Visibility of the mirrors can deteriorate with growing age too. Deteriorating visibility or breakage, whatever the reason, the Pontiac G6 mirrors have to be replaced to ensure the safety of passengers traveling in the car.

Remember, replacements of GM side-view mirror are expensive whether you purchase them from dealer or aftermarket venues. Therefore, save money by replacing the side view mirrors on your own. The steps given below are for the determined do-it-yourselfer who believes replacing Pontiac G6 mirrors is nothing impossible.

Steps to Replacing the Pontiac G6 Mirrors

Before starting the replacement process, roll down the passenger side door window and shut off the ignition. Pry the window control panel gently from the arm rest. Use a pry tool or screwdriver and start from the bottom of the panel. Flip the panel and disconnect all the wire harness outlets from it and set it aside.

Now it is turn to remove the two panel door plugs near the arm rest concealing the two screws. You need to use Phillips head screwdriver to remove the screws. Now press in the middle of the plug to unlock and remove the door panel retainer plugs.

You will find a mounting triangle from the upper inside door panel covering the side-view mirror, separate it. Lifting the door panel outward and then upward, it will be removed. Separate the speaker wire from the bottom of the door panel and set the door panel aside. Now find and separate the mirror wire harness. You will see a foam insulation from the inside panel that covers the side-view mirror, pull it back. Use ratchet, extension, and a socket to unscrew the three mounting nuts from the mirror. Make sure you do not drop the nuts into the door cavity. By prying the mirror gently, take it away from the door.

Now it is time to install the new mirror. Place the mirror at the place of the old one and replace the mounting nuts on the mirror studs. With the ratchet, socket, and extension, tighten them. Now re-plug the mirror wire harness. Replace the foam insulation and the mounting triangle. Replace the door panel by following the steps in reverse.

Remember to go through the user manual that came with the Pontiac G6 mirrors package and in case you are not confident of replacing the mirrors on your own, take help from a qualified mechanic.

Guidelines for Replacing Pontiac Bonneville Headlights

,

Debuted in 1957, Pontiac Bonneville till date is one of the most successful cars of Pontiac. As a mainstream vehicle that was neither a luxury nor a sports car, Pontiac Bonneville was is business for forty seven years. In fact, it is one of the rarest nameplates that have lasted that long thereby, creating a wonder in itself and in the history of cars. Today, the early Bonnevilles are extremely valued as collector cars.

For this classy and reputed car, maintenance has also to be special. Like any other cars, the Pontiac Bonneville comes with some vulnerable parts. One of them is Pontiac Bonneville headlights. Headlights are located at the front end of any car, which makes them fragile to collision. Not only collision, corrosion also deteriorates the function of the Pontiac Bonneville headlights. With their constant exposure to sunlight, rain, snowfall and other climatic conditions, the Pontiac Bonneville headlights like any other headlights become discolored too. In any of these situations, replacement of the Pontiac Bonneville headlights is essential as headlights play an enormously important role in maintaining the safety and security of the car.

Replacing Pontiac Bonneville headlights is not tough as they are crafted to have wires that fit exactly into a wiring socket for the purpose of easy installation and removal, and therefore, even the drivers who lack mechanical expertise can also replace it by themselves. In case you believe in do-it-yourself maintenance, then learn the steps below and replace the headlights on your own. Remember, the steps below do not apply for the models made before 1992.

Step 1

Turn off the engine and headlight switch. Engage your emergency brake for added security.

Step 2

With the two hood release latches, primary and auxiliary, open the hood of the Bonneville.

Step 3

At the front edge of the engine compartment, you will find the backside of the headlight assembly.

Step 4

Now to find the broken bulb socket, you have to reach the backside of the headlight assembly. Once you find the socket, remove the bulb by twisting it anticlockwise.

Step 5

Disconnect the electrical connector from backside of the socket.

Step 6

Remove the old bulb from socket and dispose of it immediately. Now hold the new bulbs with towel and insert it inside the socket. You may need to twist the bulb clockwise.

Step 7

Now reconnect the electrical harness to the socket and push the socket back into the headlight assembly and screw it. Check the new bulb and make sure it works before closing the hood.

You should not touch the bulbs with bare fingers as natural oil, dirt, and debris of your finger can damage the bulbs permanently. In case you accidentally touch the bulb, use a towel moistened with rubbing alcohol to clean the new bulb’s glass. Make sure you have gone through and understood the steps and the user manual that came with the package thoroughly before initiating the process of replacement of Pontiac Bonneville headlights. In case, you cannot replace the headlights on your own, take help of a qualified mechanic.

Nissan Sentra Mirrors – Learn How to Replace Them

,

Car mirrors are integral parts of any car. Similarly, the Nissan Sentra mirrors are essential part of the Nissan Sentra. The mirrors are used for giving clearer view of the road, starting from outside view to inside view, or even side view. The Nissan Sentra mirrors help the driver at the time of parking the vehicle, or taking left or right turns. The outside mirrors of the Nissan Sentra mirrors, reflect the side and behind view of the car whereas the rearview mirror reflects the image out of the rear window. Mirrors of the Nissan Sentra help the driver know about the exact condition and setting of the traffic so that driver can make a right decision on the road.

However, like any car, the Nissan Sentra also has some parts, which are vulnerable to breakage. Amongst them, the most vulnerable one is the Nissan Sentra mirrors. Like any car mirrors, the Nissan Sentra mirrors become damaged by collision and deteriorate with age. However, whatever the condition of your Nissan Sentra mirrors is – broken, damaged, or cracked – it calls for immediate replacement with a new and good quality Nissan Sentra mirror.

Keeping in mind the important functions of the Nissan Sentra mirrors, replacement of the mirrors is important in case they are broken. Replacement of the mirrors is not difficult; therefore, if you are a self-motivator and a do-it-yourselfer, replace the mirrors on your own.

Mirror replacement process in any car starts with removing the old mirror.

Remove Old Mirror

Step 1

Initiate the process by disconnecting the negative battery cable. Then roll down the window and take keys out of ignition.

Step 2

Locate the inside door trim panel and take the panel out by using a screw driver. Pry screw and clips that hold the panel.

Step 3

Now use a screw driver covered by cloth and then you pry the plastic triangle-shaped mirror cover from the door panel. Then remove the sail trim panel.

Step 4

The door frame of Nissan Sentra and Nissan Sentra mirrors are attached by a few bolts and nuts, to remove the old mirror, remove the bolts and nuts.

Step 5

Take the entire mirror assembly out from the door and remove the old mirror.

Install New Mirror

Step 1

Place the new Nissan Sentra mirrors in place, and reattach the nuts and bolts in the same order you removed them. Make sure the nuts and bolts are tight enough before you move to the next step.

Step 2

Now re-connect Sentra’s electrical supply wire that comes out of the door panel with the mirror wire.

Step 3

The mirror panel and interior cover have to be replaced now. Put the door panel back in place. Replace all clips and screws. Then check whether the lights are properly working or not.

Remember to not to remove Nissan Sentra mirrors when they are cold or frozen as that can cause the mirror to crack. Give the mirror enough time to be warm before you initiate the process of replacing. Additionally, you should always remember to remove the negative cable from your car’s battery before you start replacing the mirror. Going through the user manual of Nissan Sentra mirrors is also highly recommended. If you are unsure about replacing the Nissan Sentra mirrors on your own, do not hesitate to take professional help.

Learn the Simple Steps of Replacing Nissan Pathfinder Tail Lights

,

The Nissan Pathfinder tail lights are groups of lights forming pairs, each of which serves a different purpose, and are fitted at the end of the Nissan Pathfinder. These Nissan Pathfinder tail lights have a major functional importance for the car:

Park/Brake Light – The first type of light in the Nissan Pathfinder tail lights system is the park light, also known as the brake light. These lights form the biggest part of the tail light system and are automatically turned on when the driver presses the brake or turns on the headlights. In some vehicles, the park lights also work as signal to the driver about foggy or rainy weather.

Reverse Lights – A part of the Nissan Pathfinder tail lights function as reverse lights. These reverse lights provide the highest illumination amongst all the tail lights and illuminate when backing. These lights are usually turned on automatically when the vehicle is on reverse gear.

Signal or Turn Lights – Drivers use these signal or turn lights as indicators so that other cars know which way a car is going to turn. Global regulatory standards make these signal lights typically yellow. These lights are also used in times of emergency or hazards.

Like any other car tail lights, the Nissan Pathfinder tail lights are also prone to breakage and damage. The very positioning at the rear end of the car makes Nissan Pathfinder tail lights fragile. However, once broken, tail lights have to be replaced immediately, as presence and usage of the tail lights is mandatory.

Replacing Nissan Pathfinder tail lights is not a tricky job once you learn the steps of replacing. If you are a do-it-yourselfer, read the steps given below and see how easily you can save loads money from wasting at the car service center for replacing Nissan Pathfinder tail lights.

Step 1

To start the replacement process of Nissan Pathfinder tail lights, first, take the keys out of the ignition and ensure your safety by engaging the emergency brake for safety.

Step 2

Go to the back of your car and open the tailgate.

Step 3

To take out the tail light cover, unscrew the two security nuts and then pull the cover out.

Step 4

Find out which one amongst the entire Nissan Pathfinder tail lights system is malfunctioning.

Step 5

Unscrew the bulb by gentle tug or by twisting it anticlockwise.

Step 6

Now with a wire brush and/or wipe clean the connection and then push the new bulb into the empty socket. Push in and turn simultaneously to fix the new bulb properly.

 

Step 7

Finally test the Nissan Pathfinder tail lights whether they are working properly or not. Make sure all the lights are working. If the lights are working properly, now screw the cover back onto the rear pillar and close the tailgate.

Remember to fix Nissan Pathfinder tail lights on time as using burned out tail lights may require you to pay a hefty fine. However, before replacing Nissan pathfinder tail lights make sure you wear rubber gloves on your hand and have gone through the user manual that came with the tail light package. In case you do not feel confident about replacing the Nissan Pathfinder tail lights on your own, do not hesitate to take the help of professional mechanics.

Mazda MPV Tail Lights – How to Replace Them

,

Mazda MPV is a car that gives comfort, class, performance at an economic rate. The current model of Mazda MPV provides a super cool yet rugged look, comfortable and spacious interior and excellent performance.

Mazda group is worldwide famous for its reliability. The same holds true for the Mazda MPV also as all their models are till date showing great longevity on American roads. However, when it comes to the Mazda MPV tail lights, problem of tail lights breakage continues in this car also. Like any other car tail lights, Mazda MPV tail lights are prone to damage because of their positioning at the rear end of the car.

Park/brake lights, reverse lights, and turn lights, all these lights together form the tail light system in any vehicle and all their functions are globally standardized. Hence, the tail light system is one of the most important parts of any vehicle. Therefore, in case your Mazda MPV tail lights are broken do not delay replacing the tail lights.

Now replacement of the Mazda MPV tail lights can be done by you. Try the following steps to see how easily it works:

Remove key from ignition and engage the emergency brake. Now go to the back end of the MPV and take the rear bumper out. With a piece of cloth, cover the tail lights module and use the tip of a flathead screwdriver and pull it away from the rear pillar.

Now use a screwdriver to remove the screw from the tail lights assembly. Loosen the screw and take the Mazda MPV tail lights assembly away from the car. Remember to pull the whole assembly sideways. Bulb-socket will now pop out. Take the bulb socket out and remove bulb from the socket by turning it one-quarter anticlockwise. Pull the bulb out of the socket and dispose it. Now place the new bulb into the socket and twist the socket back into the tail light assembly. Push the tail lights assembly onto pins and then replace all screws. Test whether the tail lights are working. If they are working, replace the tail lights cover back onto the assembly and close the tailgate. You are done!

Remember to wear rubber gloves while changing bulbs as dirt, oil, or debris from your fingers can make the bulbs explode after reaching full operating temperature. Additionally, you should start the replacement process only after going through the user manual that came with the Mazda MPV tail lights package. In case you are not sure about changing the tail lights by yourself, take help of an expert mechanic.

Buy Authentic Lexus LX470 Tail Lights from Authentic Online Car Parts Retailer

,

Tail lights are integral parts of any vehicle and the same goes for the Lexus LX470 tail lights. Often known as the rear position tail lamps, Lexus LX470 tail lights are fitted at the rear sides of the car and are used to keep both the driver and passengers safe while driving. Looking at the multifaceted functionality of the tail lights, today, the Global Regulatory Standards has mandated the presence and usage tail lights in every car.

Breakage of tail lights is not something exclusive to the Lexus LX470 tail lights. Thanks to their positioning, tail lights of any are prone to breakage. In case the Lexus LX470 tail lights of your Lexus LX470 have broken due to some reasons, it is high time you buy a replacement for your tail lights.

Nowadays, to buy authentic replacements of car parts, neither hunting store after store, nor wasting your time and energy for buying replacement of Lexus LX470 tail lights is required. Instead, sit in front of a computer and browse through some relevant web pages of online car parts retailers and experience a hassle free buying of Lexus LX470 tail lights.

However, finding authentic online car parts retailer for Lexus LX470 tail lights is not difficult as there are many car parts retailers present online. So how can you select the right retailer who gives you quality product at reasonable price?

Here are some useful tips, which will help you find the authentic car parts retailers in a less time-consuming and more efficient way.

Tip 1: Consult Friends for Buying Lexus LX470 Tail Lights

Are you replacing Lexus LX470 tail lights for the first time? If yes, then you should start your search for authentic car parts retailer by asking your friends who have prior experience in dealing with online authentic car parts retailers. Their advice will help you in finding authentic retailer of Lexus LX470 tail lights easily.

Tip 2: Compare Prices Offered by the Retailers

When you have names of reputed online car parts retailer, now is time to compare the prices that each of them are quoting for Lexus LX470 tail lights. Comparison of price will help you to get a clear understanding of different prices and it will help you choose the retailer. However, it is always suggested that you should never make your decision based on the price of the product as many dishonest retailers sell forged Lexus LX470 tail lights at cheap rates. Therefore, look for products that come with lifetime warranty, replacement warranty and give more priority to quality rather than the price.

Tip 3: Buy Lexus LX 470Tail Lights with Lifetime and Replacement Warranty

In case your retailer is selling you Lexus LX470 tail lights without lifetime or replacement warranty, it’s advisable to be cautious. Many online car parts retailers sell products with lifetime and replacement warranty. Before buying Lexus LX470 tail lights, call the retailer to confirm the warranty.

Tip 4: Confirm Shipping Time

To confirm the authenticity and quality of the online retailers, check how much time they take for shipping products. All good and reputed online car parts retailers ship their products in three days. If your chosen retailer asks for more time, you need to verify their reputation once again.

Tip 5: Check Out the Feedback About the Retailer

Checking out the feedback about the retailer gives you important insight about the retailer as it contains feedbacks and opinions about the products and customer services of the retailer posted by previous buyers. Positive feedback from various customers for a particular retailer for their product and service will help you decide about buying the Lexus LX470 tail lights.

The above mentioned tips are some parameters that will genuinely help you check the authenticity of the Lexus LX470 tail lights retailers. Now fill your virtual cart up with all needed car parts, starting from Lexus LX470 tail lights to complete engines without even leaving your garage!

Steps to Follow While Replacing Infiniti M45 Headlights

,

Like any other headlights, the Infiniti M45 headlights are the eyes of Infiniti M45. The headlights are located at the front end of the car and emit lights from there, making the car visible for others and the road visible for the driver while driving. Though the main function of the Infiniti M45 headlights are to enable drivers to see at night, yet the Infiniti M45 headlights are also used to notify other drivers of your presence in foggy conditions or a mountain pass where visibility is very low. Therefore, presence of the Infiniti M45 headlights is mandatory for safe riding for both the driver and passengers and for people on road.

Due to their undeniable functional importance, the Infiniti M45 headlights need quick replacement when they are damaged or broken. There’s a fleet of black-and-white cruisers who will gladly replace the headlights for you but unfortunately they will charge quite a lot of money for replacement. Why will you pay that amount of money when you can replace the Infiniti M45 headlights on your own? There are some simple steps to replace the headlights, learn them and do the replacement easily, that too without spending a single penny from your pocket.

Step 1

Initiate the replacement process by ensuring the ignition key is in the off position and the Infiniti M45 headlight switch is off.

Step 2

Open the hood of your Infiniti M45 and find out the top of the headlight assembly. Now locate and remove the central bolt of the plastic shroud by using a ratchet and a socket. Lift the shroud out of the way, so that you gain access to the Infiniti M45 headlights.

Step 3

Find the brackets on the top rear of each side of the Infiniti M45 headlights assembly and then pull up the brackets and align the hole on the bottom of each bracket to the retaining tabs on the assembly.

Step 4

Take the headlight assembly forward away from the Infiniti and make sure you do it without damaging the car bumper.  Now remove the three guide pins.

Step 5

Give support to the Infiniti M45 headlights assembly with one hand, locate the wire harness from the back of the bulb socket and then un-clip them.  Turn the bulb counterclockwise 1/3 of a turn to align the release tabs of the ring and the assembly and take them out.

Step 6

Now hold the new bulbs with towel and insert the Infiniti M45 headlight bulb into the ring. Then align the tabs of the ring and the tabs of the headlight assembly properly. Fix the new bulbs by pushing them inside and twist clockwise 1/3 of a turn to lock. Reattach the wire harness and push the headlight assembly back inside its cavity and confirm that the Infiniti M45 headlights are working properly.

Step 7

Align the three guide pins to their seats and push the headlight assembly back into them gently until they fit into place. Replace the retaining brackets and the shroud. Remove the tools and old bulb and close the hood of your Malibu.

However, before you fix the Chevy Malibu headlights on your own, go through the user manual that came with the headlight packet. In case you are not confident of replacing the Infiniti M45 headlights yourself, trust a professional mechanic for the job.

Stop Wasting Money at Garage – Replace Dodge Caliber Mirrors on Your Own

,

Like any car mirrors, the Dodge Caliber mirrors are the staple components of the car. Many people, mostly women, use the car mirrors as grooming accessory but in reality, the Dodge Caliber mirrors work more than that. By only looking at the Dodge Caliber mirrors, driver gets the view of the peripherals and can calculate the approximate distance and speed of other cars while driving in traffic.

The rearview mirrors of the Dodge Caliber mirrors are located in the uppermost center near the windshield fronting of the driver’s area and reflect the images out of the rear window.

A side view mirror of the Dodge Caliber mirrors, come usually attached to the car doors on both sides and help the driver to be able to see the vehicles coming from behind. The rear and side view mirrors also help to see people or objects at the times of backing up or changing lanes. These functions make the Dodge Caliber mirrors essential for the car.

It is not unknown to anyone that, mirrors are prone to breakage, even the slightest nudge from another vehicle can result in cracking of the glass. Older models can also deteriorate with age. Deterioration or breakage, any of the two calls for immediate replacement of Dodge Caliber mirrors for saving the riders of the car from accidents.

How to Replace Dodge Caliber Mirrors:

At first, buy a replacing mirror keeping in mind the color, make, and year of your Caliber. Also buy a trim tool from local auto parts store. Now roll down the window and shut your caliber off. Now to avoid the risk of electrocution disconnect the battery’s negative cable. With a screwdriver, remove the entire door panel.  A trim tool will help you to take the clips out around the car door. When all clips are out, pull the door panel from the door. Now disconnect the cord of the power mirror from the door panel connection.

Use a socket or a ratchet, and take out the side view mirror bolts. Now the entire mirror assembly can be removed easily from the car. Use a torx driver to pry the plastic tabs and remove the old mirror from the mirror assembly.

Now place the new Dodge Caliber mirror into the mirror assembly. Tighten the screws to attach the mirror to the door panel. Now re-connect the cord on the door panel to the power mirror cord. Place all the clips and attach the door panel then tighten all screws. Put all the screw caps in the reverse order. Now, connect the battery, and confirm that the Dodge Caliber power mirror works properly.

Replacing the Dodge Caliber mirrors is easy once you learn the steps. Go through the user manual that came with the package and in case you are not confident of replacing on your own, take help from a qualified mechanic.

Load More